Elkhart Brass Stinger 2.0 8297 - Manual (Page 6)

6
E. 8297MB Storage Bracket
The 8297MB is an optional, lightweight bracket that is
designed to hold the Stinger 2.0
® securely in place while
in storage. The 8297MB can be used to store the complete
monitor or the portable base separate from the upper
monitor. A single release lever allows for fast and
efficient removal of the unit from the storage bracket. The
bracket can be mounted either horizontally or vertically.
(Not intended to be used while flowing water.)
Fig. 6
8297MB Storage Bracket
C. 81315001 3” Companion Flange Kit
Elkhart Brass offers a 3” companion flange kit to be used
with the 8298F 2.0 deck mount adapter. The kit consists of
an ANSI 3” 150# flange, four 5/8 – 16 bolts with nuts, and a
3” gasket.
Fig. 3
3" Companion Flange Kit
D. Portable Bases
There are six optional portable bases available:
1. Two 2.5” clappered female swivel inlets
2. One 3.5” swivel inlet
3. One 4.0” swivel inlet
4. One 4.5” swivel inlet
5. One 4.0” Storz inlet
6. One 5.0” Storz inlet
The portable base support legs can be folded for
compact storage in an apparatus compartment or hose
bed pre-connected to a supply hose line. The folding
legs are designed to be easily rotated from the stored
position to the extended and locked position and back
again. The spring loaded carbide ground spikes are very
hard and very sharp, important factors in the prevention
of sliding under flow.
Fig. 4
5" Storz Base
Fig. 5
Dual 2.5" Siamese Base