Eberspacher EasyStart R - Manual (Page 8)

8
Activate mobile unit / query heater‘s operating state
LED display
Use the mobile unit to establish the connection with the
stationary unit.
press until the LED display lights up green. Then
release the
key. If a link has been established
between the mobile unit and stationary unit,
• the LED display flickers red (heater off)
or
• the LED display flashes red (heater on).
The radio remote control is activated.
• If the key is not released when the LED is list
green the mobile unit switches itself off.
• Possible LED displays such as fast alternating red-
green flashes, slow alternating red-green flashing,
fast red flashing or a red display are described in the
chapter ”What to do if …?“ from page 13.
Please note!
Operation and Adjustment
LED: green
LED: flickers red
LED: flashes red
Function pushbutton
The following activities can be executed with the button
installed in the vehicle:
• Start heater mode, heating duration 30 minutes
(LED on ON button)
• Switch off heater mode (LED on OFF button)