Eberspacher EasyStart R - Manual (Page 12)

12
Operation and Adjustment
Activate mobile unit with (see also page 8).
Confirm LED display „ventilate on“
with
.
Ventilate is switched off.
The following action is possible:
•
can be used to switched to “heat on”
(see page 9 for further procedures).
• Change operating time (see page 10).
Activate mobile unit with (see also page 8).
Select LED display „ventilate off“ with
and confirm with .
Ventilate is switched on.
The following action is possible:
•
can be used to switched to “heat on”
(see page 9 for further procedures).
• Change operating time (see page 10).
Switch on ventilate (only possible in air heaters with two diagnosis cables and the
combination of EasyStart R with EasyStart T.
LEDdisplay
Switch off ventilate
Data transmission
LED: green
LED: flashes green
LED: flickers green
Data transmission
LED: green
LED: flickers red
LEDdisplay
Data transmission
LED: green
LED: flickers green
LED: flickers red
LED: flashes green