Eberspacher EasyStart R - Manual (Page 13)

13
Replace battery
• Use a coin to turn the bayo-
net fastening of the battery
cover in the direction of the
arrow.
• Remove the battery cover.
• Check the cover seal for damage.
• Remove dead battery.
• Insert new battery. The battery has been
correctly inserted if the plus pole symbol
and the type designation of the battery
can be read.
Maintenance
Charged status of the
mobile unit‘s battery
If the LED display of the mobile unit indi-
cates the battery is too weak with a red
display, purchase a standard
CR 2430
type round cell battery made by Varta,
Sony or Renata, as recommended by
JE-Eberspächer.
LED: Display lights up red
Description Remedy
A fault occurs in the heater during opera-
tion (e.g. fuel shortage or interruption in
the diagnostics cable). Refer to the heater‘s installation instruc-
tions for troubleshooting advice.
Fast red flashing
What to do if …?
LED display
• Put on the battery cover.
The drip-shaped marking
must point to the web
between the recesses.
• Use a coin to turn the
bayonet fastening of the battery cover
in a clockwise direction until the slit
reaches the vertical position.
• Activate mobile unit (see page 8).
LED displays