Eberspacher EasyStart R - Manual (Page 14)

14
Description Remedy
The mobile unit‘s battery is too weak.
Data transmission is not possible. Replace battery (see page 13).
LED lights up red after activation
The unit cannot be used during the ”fast
red-green flashing“ signal. A running
heater can only be switched off using the
button in the vehicle.
LED displays
Description
Communication between the mobile unit and stationary unit is not possible.
Possible causes
Remedy
Distance between mobile unit and vehicle
too large. Reduce distance.
Dense buildings between mobile unit and
vehicle? Change the position relative to the
vehicle e.g. hold mobile unit higher or
move it to the side. Reduce distance
from vehicle.
Several Easy Start radio remote controls
are operated simultaneously. Reactivate mobile unit after a pause.
Mobile unit has not been taught. Teach mobile unit as described in the
installation instruction.
Please note!
Fast red-green flashing
Description Remedy
Stationary unit is in learn mode. Teach mobile unit as described in the
installation instruction.
Slow red-green flashing
What to do if …?