DIGIWEIGH DWP-B2004 - Manual (Page 7)

order not to influence from airflow of opening or closing the door or
window．
4)The table should put with less libration．The around of the room is
the best place to put the balance since that place has little libration．
5)The balance should put where avoid shining and be far away from
heating．
6) The balance should put far away from goods or equipment which
has magnetism or bring magnetism.
7)Don’t use the balance where is dangerous．
8) Don’t use the balance under the condition of high wet and high
dust for long time．
9)The best temperature for using the balance is 20℃±5℃．The best
humidity is 50—60％RH．
1 0)When the balance moves from a colder place to a warmer place，
moisture of air will coagulate inside the balance，result in influencing
the balance definition and reliability． In order to eliminate the
influence，is better to put the balance in the working place without
power supply for 2 hours．
3．Setting
Open windproof cover and put balance pan in the balance. Insert
external power supply wire BNC into the balance．and insert output
BNC into the power supply again(voltage 220V)，Wait for turning on
the balance.
-5-