DIGIWEIGH DWP-500C2X - Manual (Page 5)

4
Chapter 4
How to calibrate the scale
Note: “on-off” key is confirmation key, “zero” key is amend key, “kg/lb” is conversion key to
change number.
1. press “zero” key and then power on, display will show “d 0.2”(division value)
2. Press “kg/lb” key to select the division value
3. After choose division value, press “on-off” key confirm, display “500”, press “Zero” to
display”00000”( input the largest weight at this step), press “kg/lb” to choose the largest
weighting (note “kg/lb” choose number, “Zero” to shift )
4. Press “on-off” to confirm, and keeping press 4 times on “on-off” key, display “load”(input
weight value at this step), press “zero” to display “000.00”, press “kg/lb” key to select the
calibration weight value
5. after input weighing value, wait until light up 15 second, press “on-off” to confirm, then
the calibration weight value will show on the display . calibration finished.