Deutz-Fahr Agrovector 25.5 - Manual (Page 46)

Section 3 - Controls and Indicators
3-10 31200751
LSI Override Switch
The LSI override switch (1) momentarily disables the automatic function cut-out.
• Depress and hold top of switch up to 30 seconds while operating joystick to
momentarily disable the automatic function cut-out.
• Release switch to re-enable the automatic function cut-out.
WARNING
TIP OVER HAZARD. Exceeding lift capacity of the telehandler could damage the
equipment and/or cause tip over.
OAL1332
1