Deutz-Fahr Agrovector 25.5 - Manual (Page 12)

Section 1 - General Safety Practices
1-2 31200751
1.3 OPERATION SAFETY
Note: The manufacturer has no direct control over machine application and
operation. Therefore, safety issues listed in this manual are non-exhaustive. The
user and operator are responsible for conforming with good safety practices.
Electrical Hazards
• This machine is not insulated and does not provide protection from contact or
being near electrical current.
• NEVER operate the telehandler in an area where overhead power lines,
overhead or underground cables, or other power sources may exist without
ensuring the appropriate power or utility company de-energizes the lines.
• Always check for power lines before raising the boom.
• Follow employer, local and governmental regulations for clearance from
powerlines.
OW0040
10 FT
(3 M)