Deutz-Fahr Agrovector 25.5 - Manual (Page 40)

Section 3 - Controls and Indicators
3-4 31200751
Park Brake
Park brake lever (2) controls the application and release of the park brake. Indicator
light on instrument panel illuminates to indicate brake is applied.
• Pull lever up to engage park brake. With park brake applied, transmission will not
engage forward or reverse.
• Lift detent ring and push lever down to disengage park brake.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-3.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON"
position, lower boom to ground and stop engine before leaving cab.
WARNING
CRUSH HAZARD. Turning engine off applies the park brake. Applying park
brake or turning engine off while traveling will cause unit to stop abruptly and
could cause load loss. To stop the machine in an emergency, either apply the
park brake or turn off engine.
OAL1261
2