Dascom TallyCom III FSL Reference Manual User Manual
Page 38
FSL Reference Manual for Print Servers
Appendix Section
No.
Name
Syntax
Parameters
22
Printer Driver Selection
%Y22,
0 = Non specific driver (must be
programmed in FSL Y62)
1 = IBM Pro Printer
(preprogrammed)
4 = PCL5 (preprogrammed)
6 = Epson FX (preprogrammed)
7 = Epson LQ (preprogrammed)
9 = IBM Pro XL24 Printer
(preprogrammed)
16 = PCL II (preprogrammed)
36
Suppress control codes
%Y36,
n1
0 = Respect all IBM control codes
1 = Suppress all IBM control codes
2 = Suppress IBM Multibyte control
3 = Reserved
4 = Suppress IBM Multibyte Control
Codes and Form Feed
5 = Suppress IBM Multibyte Controll
codes
40 Absolute
Horizontal
Positioning
%40,
n1
10 = AHP is done using spaces
11 = AHP is done using positioning
command
48 Permanent
ESC
Character Selection
%Y48,<'char.'>%
or
%Y48,
'char.'
= character selected from the
current IBM characte table
xx
= HEX value of the character
selected from the table
*00
61
Setup for User Strings
%Y61,
n1
0-7 = User String No.
n2
00-FF = String contents in HEX
62
Setup for IBM-defined
strings (Tray select
strings)
%62,
n1
120 = Tractor Tray 1
121 = Envelope feed
123 = Manual Cutsheet Feeder
125 = Tray 1
126 = Tray 2
127 = Tray 3
90
User ESC String
Definition
%Y90,
n1
0 = Erase strings
01-FF = String no. in HEX
n2
'
= String contents in apostrophe
notation
96
Font Change Simulation
%Y96,
1-65535 = GFID no.
97
User GFID/Font Selection
%Y97,
n1
1-65535 = GFID No.
n2
n3
38