Dascom TallyCom III FSL Reference Manual - Manual (Page 25)

FSL Reference Manual for Print Servers
Appendix Section - FSL Commands for IBM 3270 emulation
No. Name Syntax Parameters
11 Paper Path %Y11,% 0 = No tray select sent to the
printer, SD in PPM command is
ignored
1 = Sent the string in Y62,120
Tractor - preprogrammed
2 = Sent the string in Y62,125
Drawer 1 - preprogrammed
3 = Sent the string in Y62,126
Drawer 2 - preprogrammed
4 = Sent the string in Y62,123
5 = Sent the string in Y62,121
6 = Sent the string in Y62,127
7 = Sent the string in Y62,122
8 = Sent the string in Y62,128
9 = Sent the string in Y62,129
10 = Sent the string in Y62,124
22 Printer Driver Selection %Y22,% 0 = Non specific driver (must be
programmed in FSL Y62)
1 = IBM Pro Printer
(preprogrammed)
4 = PCL5 (preprogrammed)
6 = Epson FX (preprogrammed)
7 = Epson LQ (preprogrammed)
9 = IBM Pro XL24 Printer
(preprogrammed)
16 = PCL II (preprogrammed)
34 Last LF on Page Sent as
FF %Y34,% 0 = No
*1 = Yes, count lines in FSL 5 and
send FF
35 Form Feed Usage %Y35,% 0 = Pass FF from Host
*1 = Count the lines in FSL 5 and
send FF
36 Suppress IBM Control
Codes %Y36,% *0 = Respect all codes
1 = Suppress all codes
2 = Reserved
37 IBM Printer Emulation
Selection %Y37,% 0 = 3287 Emulation
*1 = 3268/4214 Emulation
2 = HEX 00-3F sent transparently
except valid SCS codes. TRN
sent non-transparently
4 = HEX 00-3F sent as blanks
except valid SCS codes. TRN
sent transparently
6 = HEX 00-3F sent transparantly
except valid SCS codes. TRN
sent transparantly
8 = HEX 00-3F are suppressed
except valid SCS codes.
HEX 00-3F in TRN are
printed as spaces..
39 Suppress Empty Forms %Y39,% 0 = No forms suppressed
*1 = Empty forms suppressed
25