Dascom TallyCom III FSL Reference Manual - Manual (Page 13)

FSL Reference Manual for Print Servers
Appendix Section - FSL Commands for IBM 3270 emulation
No. Name Syntax Parameters
22 Printer Driver Selection %Y22,% 0 = Non specific driver (must be
programmed in FSL Y62)
1 = IBM Pro Printer
(preprogrammed)
4 = PCL5 (preprogrammed)
6 = Epson FX (preprogrammed)
7 = Epson LQ (preprogrammed)
9 = IBM Pro XL24 Printer
(preprogrammed)
16 = PCL II (preprogrammed)
34 Last LF on Page Sent as
FF %Y34,% 0 = No
*1 = Yes, count lines in FSL 5 and
send FF
35 Form Feed Usage %Y35,% 0 = Pass FF from Host
*1 = Count the lines in FSL 5 and
send FF
36 Suppress IBM Control
Codes %Y36,% *0 = Respect all codes
1 = Suppress all codes
2 = Reserved
37 IBM Printer Emulation
Selection %Y37,% 0 = 3287 Emulation
*1 = 3268/4214 Emulation
2 = HEX 00-3F sent transparently
except valid SCS codes. TRN
sent non-transparently
4 = HEX 00-3F sent as blanks
except valid SCS codes. TRN
sent transparently
6 = HEX 00-3F sent transparantly
except valid SCS codes. TRN
sent transparantly
8 = HEX 00-3F are suppressed
except valid SCS codes.
HEX 00-3F in TRN are
printed as spaces..
39 Suppress Empty Forms %Y39,% 0 = No forms suppressed
*1 = Empty forms suppressed
47 ESC Mode Selection %Y47,% *1 = ESC xx sent as "xx" HEX
3 = Double Escape Feature
48 Permanent ESC Character
Selection %Y48,<'char.'>%
or
%Y48,%
%Y48,[;n2
[;n3]]% n1
'char.'
= character selected from the
current IBM char. table in
apostrophe notation
xx
= HEX value of the character
selected
from the LU3 table
n2
a max. of 5 chars. to introduce
transparancy (invalid values: 0-9
and A-F)
Lead-in sequence
n3
a max. of 5 chars. to introduce
transparancy (invalid values: 0-9
and A-F)
Lead-out sequence
*00
51 User-Defined String(s) at
Begin Job %Y51,% 0-7 = One or more strings defined
in FSL 61
13