CounterPath Bria iPhone Edition User Guide - Manual (Page 7)

Bria iPhone Edition User Guide
3
2 Configuring
2.1 Getting Ready
1. Once you have installed Bria iPhone Edition, make sure you have set up Wi-Fi and 3G correctly in your
iPhone:
• Set up Wi-Fi: from the main iPhone screen, tap Settings > Wi-Fi. Turn on the Wi-Fi field. The Choose
a Network panel will be populated with access points. Tap to choose an access point and wait for the
item to show a checkmark (indicating that you are connected).
• Set up 3G: from the main iPhone screen, tap Settings > General > Network. Turn on the Enable 3G
field.
2. Obtain the following information from your VoIP service provider:
• Your username, password and domain.
• Your display name and auth name (authorization name), if used by your service provider.
• The outbound proxy, if used by your service provider.
• Your voicemail number, if your service provider provides this service.
You may also want to try to obtain information about the following:
• DTMF method: 2833 or SIP INFO. Bria will work without the correct setting, but you may not be able
to work with an auto attendant (
“ press 1 for customer service” menus). See page 19 for details.
• ICE and STUN information; see step 3 below for more information.
• DNS SRV: you may want to ask your VoIP service provider if they want this service on or off.
For more information on this data, see page 19.