CounterPath Bria Android Edition 1.2 User Guide - Manual (Page 44)

CounterPath Corporation
40
5.2 User Preferences
Field Description
Allow Cellular Data • On (checked): When a Wi-Fi connection is not available, Bria will attempt to place
calls or exchange messages using the mobile data network. Data charges with your
mobile carrier will apply. If you turn this setting on, we recommend you purchase the
G.729 codec (page 45) because it provides better audio quality on 3G/4G calls.
• Off: When a Wi-Fi connection is not available, you will not be able to place or
receive calls, or exchange messages.
Play Ringtone On to hear the ringtone.
Vibrate On to vibrate when you receive a call.
Select Ringtone Set to the desired ringtone.
IM and Presence On to enable IM and Presence on Bria.
SMS On to enable SMS on Bria.
Call Intercept • On: When you make a call using the native Android phone, the call will be
intercepted by Bria and placed using Bria.
• Off: Calls made from the native phone are placed using the native phone. Calls made
from the Bria screens are placed using Bria.
• Prompt: Each time you make a call using the native Android phone, you will be asked
whether you want to place the call via Bria or the native phone.
Keep Wi-Fi radio awake Controls whether the Wi-Fi radio stays on when the screen goes dark (phone gets auto
locked).
• On (checked): The Wi-Fi radio stays on, so that when the screen goes dark (1) you
stay logged on via Wi-Fi (as long as you are in your Wi-Fi network) and (2) incoming
calls will use Wi-Fi instead of mobile data. Radio On uses more battery power.
Perhaps choose On if you have a limited data plan.
• Off: The Wi-Fi radio is turned off, so that when the screen goes dark (1) Bria will re-
log in via the mobile data network and (2) incoming calls will use your mobile data
plan. (Unless 3G is not enabled on your phone and/or in Bria, in which case Bria logs
out and you will not receive calls as long as the phone is dark.) Radio Off uses less
battery power. Perhaps choose Off if you have an unlimited data plan.
Auto Start on Boot On to automatically start and log into Bria when you start your Android device. Even if
Bria was logged out when you powered off the phone, Bria will start and log in when the
phone starts.