Condux WDR505 Underground Pulling Trailer - Manual (Page 15)

15
F. OIL MAINTENANCE
At least once a year, or as frequently as required, using compressed air, blow all
debris from the fins of the oil coolers.
!CAUTION: Personnel cleaning the oil coolers as per above
should wear all required personal protective gear, including a
respirator.
G. GREASING
The crown gear of the bull-wheels should be greased 2-3 times per day using the
proper grease.
Grease all the other points not automatically lubricated daily.
Use IP ATHESIA GR2 (ISO XBCEA 2) grease or equivalent from the enclosed
“SUGGESTED LUBRICANTS” table.
H. ELECTRONICS NOTE
When cleaning the machine, avoid direct spraying of water or steam on electronic
components or the control panel.
For the other periodic operations refer to the summary table for the ordinary
maintenance (see next page).