Condux CableGlider Cable Pullers - Manual (Page 6)

General Information
Condux CableGlider ® Cable Pullers are built to provide reliable
performance to improve the efficiency of your cable pulling operations.
Our pullers are designed to be portable and self-contained, with sheaves
and adapters included. Condux pullers have a number of advanced
features, such as a self-tailing capstan for added pulling stability and to
permit one-worker operation (Standard & Plus models only). Our Heavy
Duty and Plus pullers feature an additional adjustable leveling arm to
facilitate both horizontal and vertical pulls.
Each model includes a tool box containing 2", 3", 3 1 ⁄
2
", and 4" (51, 76, 89,
and 102 mm) conduit adapters and a 2"-4" (51-102 mm) retaining fork.
NOTE: While the cable puller itself can be used with a variety of rope
diameters, the self-tailing capstan mechanism is designed to work with
rope from
5 ⁄
8
" (16 mm) to 7 ⁄
8
" (22 mm) diameter.
Condux Heavy Duty CableGlider
The Condux Heavy Duty CableGlider is specially designed to provide
maximum pulling power for longer and more difficult conduit runs, while
offering unmatched versatility for a variety of pulling applications. Most
important, it has the added pulling power you need, delivering up to
12,000 pounds (53,375 N) of pulling force. It operates on 115V at either
15 or 30 feet (5 or 9 m) per minute.
The puller is equipped with a heavy duty powerpack and a two-speed
motor capable of pulling at full capacity in low speed. Other features
include an extra pivoting arm, heavy duty frame, retaining fork, a foot
switch for added safety and operating convenience, and flotation tires with
pins on the front wheels for adjusting the puller’s height.
CableGlider Plus
The Condux CableGlider Plus comes equipped with the same removable
powerpack and accessories as our Standard Duty puller, but also features
a Heavy Duty frame and an extra pivoting arm for added versatility. It has
flotation tires with pins provided on the front wheels for adjusting the
puller’s height.
Standard Duty CableGlider
The Condux Standard Duty CableGlider provides up to 6,500 pounds
(28,912 N) of pulling force at low speed. It operates on 115V at either 15
or 30 feet (5 or 9 m) per minute . The frame is made of high quality tubular
steel and equipped with tandem flotation tires.
1.
5
SEE CABLEGLIDER SPECIFICATIONS ON PAGE 27