Condux CableGlider Cable Pullers - Manual (Page 4)

3
SAVE THESE INSTRUCTIONS
Disconnect Tools
8. Always disconnect the power when not in use and before installing, removing, or servicing the
powerpack.
Keep Work Area Clean
9. Cluttered areas invite injuries.
Consider Work Area Environment
10. Do not use the puller in wet or damp locations, and do not expose it to rain.
11. Keep the work area well-lit.
12. Do not use the puller in the presence of flammable liquids or gases.
Guard Against Electric Shock
13. Guard against shock while operating the puller by preventing bodily contact with grounded
surfaces (e.g., metal pipes).
Keep Children Away
14. Do not let anyone but the operator touch the puller or the extension cord; all visitors should be
kept a safe distance away from the work area.
Store Idle Tools
15. When not in use, the puller should be stored in a dry, secure area—out of the reach of children.
Don't Force Tool
16. Use the puller only for its designed use; do not force the puller to perform beyond its
capabilities.
Dress Properly
17. Do not wear loose clothing or jewelry; they can become caught in moving parts.
Use Safety Glasses
18. Work gloves, non-skid safety boots, safety glasses, and a hard hat should always be worn.
19. Operators with long hair should contain their hair beneath their hard hat.
Don't Overreach
20. Keep proper footing and balance at all times.
Maintain Puller & Powerpack with Care
21. Follow instructions for lubricating and changing accessories. Inspect the powerpack’s cord
periodically, and if damaged, have it repaired or replaced by an authorized service center.
Inspect extension cords periodically, and if damaged, replace them. Keep the puller dry, clean,
and free from oil and grease.
Stay Alert
22. Watch what you are doing. Use common sense. Do not operate the puller when you are tired.
Check for Damaged Parts
23. Before further use of the puller, any damaged part should be carefully inspected to determine
that it will operate properly and perform its intended function. Check for proper alignment of
moving parts and that there is no binding. Ensure all mounting hardware is securely fastened.
Any damaged part should be properly repaired or replaced by an authorized service center.
Avoid Unintentional Starting
24. Do not carry the powerpack if it is plugged in. Be sure the switch is off before plugging in the
power cord.
Secure Work
25. Secure the conduit to its associated structure before pulling any cable through it.