Comelit FT SB 11 - Manual (Page 19)

FT SB 11
17 FT SB 11
ENGLISH
It is necessary to set the
CALL MODE as Standard
on the software 1249/A.
If the download has
terminated successfully.
If some anomaly has
occurred during the
download.
ON DISPLAY DESCRIPTION OPERATION
Connect the small cable
provided with the software
art.1249/A to terminals TX /
RX / - ( or D / D- if there
is an RS485 line ).
Run the software
art.1249/A.
Consult the in-line Guide
for the settings required.
Compile the list with the
User name and Code fields
in the software art.1249/A,
or load an existing one.
Press the Download
pushbutton in software
art. 1249/A.
SELECT NAME
BY
SELECT NAME
BY
DOWNLOAD
ENDED
Or:
DOWNLOAD
FAILED
↑ ↓
↑ ↓
5D) INSERTING A LIST ( DOWNLOAD )
By means of the software art.1249/A it is possible to enter the list with the User name and
Code fields, in increasing alphabetical order, in the module 3072/A.
It is necessary to carry out the following operations:
INITIAL CONDITION
Module supplied
in stand-by condition. SELECT NAME
BY
↑ ↓
5C) MULTIDOWNLOAD
It is possible to create an RS485 system with digital call modules Art.3072/A to upload or
download an user name list on any of the modules on this system, using a pc upgraded
with software 1249/A version 2.2 or later.
Each module must have different ID CODE (see paragraph 4A-4).
To install the RS485 system please refer to diagram CA/EN/109.
5B) CANCELLING A NAME BY MEANS OF ART. 1230
ON DISPLAY DESCRIPTION OPERATION
BIANCHINI
PRESS TO CALL
DELETE
TENANT?
DELETE
Followed by:
ROSSI
PRESS TO CALL
SELECT NAME
BY
Select the user name
you want to eliminate
by scrolling the list
with the
keys.
(EXAMPLE: BIANCHINI)
Press the NAME
key of Art. 1230.
Press the ENTER key
of Art. 1230 to confirm
elimination or ESC
to cancel.
➞
Confirmation of cancellation
is requested.
The name has been
eliminated.
The next tenant in
alphabetical order is diplayed.