Comelit FT SB 11 - Manual (Page 15)

FT SB 11
13 FT SB 11
ENGLISH
INITIAL CONDITION
4A-2) DISPLAYING THE CONVERSATION, DOOR-OPENING AND PORTER MODULE
RESET TIME PARAMETERS
This operation allows the values of the conversation, door-opening relay closure and reset
wait time values set in the porter module to be displayed.
Module art. 3072/A
supplied wih terminal
PR connected
to terminal -.
Porter module art. 3062 /
3262/ 3268 supplied
with terminal PR
connected to terminal -.
The module is in the
programming stage:
▲ or ▼ to scroll the menus
to select the menu
to pass to the lower
level menu.
The module is in the
programming stage.
MAIN
SETTINGS
↓
AUDIO TIMING
VALUE: 100 ↑ ↓
After 3 seconds, the values
of the other parameters are
displayed in sequence.
ON DISPLAY DESCRIPTION OPERATION
Select the
MAIN SETTINGS /
SYSTEM PARAM. /
SPEAKER PARAM. /
VIEWING menu.
After the modification
has been made,
remove the
connections between
PR and – on the
3072/A 3062 3262
and 3268 terminals.
If the entry has been made
correctly.
ON DISPLAY DESCRIPTION OPERATION
Select the
MAIN SETTINGS/
SYSTEM PARAM. /
DOWNLOAD TYPE menu.
Enter the desired value
using the
▲ or ▼ keys.
EXAMPLE: 1
Press the key to confirm
the parameter value.
After the modification
has been made,
remove the connections
between PR and – on the
3072/A terminal.
INITIAL CONDITION
4A-3) TYPE OF SERIAL DOWNLOAD
The parameter sets the type of connection used to download the user list.
An RS232 or RS485 interface is available.
Module art. 3072/A
supplied with terminal
PR connected
to terminal -. The module is in the
programming stage:
▲ or ▼ to scroll the menus
to select the menu
to pass to the lower
level menu.
MAIN
SETTINGS
↓
DOWNLOAD TYPE
VALUE: 0
DOWNLOAD TYPE
VALUE: 1
PARAMETER
CHANGED
↑ ↓
↑ ↓