Comelit FT SB 11 - Manual (Page 16)

GROUP S.P.A.
FT SB 11 14
4A-4) RS485 ADDRESS
The value of this parameter is only used in special applications.
INITIAL CONDITION
Module art. 3072/A
supplied with terminal
PR connected
to terminal -. The module is in the
programming stage:
▲ or ▼ to scroll the menus
to select the menu
to pass to the lower
level menu.
If the entry has been made
correctly.
If the parameter does not
come within the foreseen limits.
ON DISPLAY DESCRIPTION OPERATION
ADDRESS RS485
VALUE: _ _ _
ADDRESS RS485
VALUE: 100
PARAMETER
CHANGED
Or:
WRONG
ENTRY
↑ ↓
↑ ↓
Select the
MAIN SETTINGS /
SYSTEM PARAM. /
ADDRESS RS485 menu.
Enter the desired value
using the
▲ or ▼ .
EXAMPLE: 100.
Press the key to confirm
the parameter value.
After the modification has
been made, remove the
connections between PR
and – on the 3072/A terminal.
MAIN
SETTINGS ↓
INITIAL CONDITION
Module supplied. LINGUA
VALORE: 01
↑ ↓
4B) SETTING THE LANGUAGE
The value of this parameter is used to set the language for the messages.
If it is the first time module art. 3072/A has been turned on, you must proceed as
described below:
The DEFAULT item sets
the messages in ITALIAN.
The next time the module
is turned on, selection
of the language is
requested again.
ON DISPLAY DESCRIPTION OPERATION
LINGUA
VALORE: 02
PARAMETER
CHANGED
↑ ↓
Enter the value of the
parameter.
EXAMPLE: 02 if you want
to set the ENGLISH
Press the
key
to cancel the operation.
To modify the value
use the
▲ or ▼ keys.
Press the key
to confirm the value
of the parameter.