Ft sb 08 – Comelit FT SB 08 User Manual

Page 29

FT SB 08

9) SETTING THE OPERATING MODE
(Standard or indirect code)

9A) STANDARD CALL MODE ( Default )
In this operating mode the entry phone user is identified by a un User Name field and by
a Code field.
EXAMPLE: User name = Smith ; Code = 1
The call can be made in the following ways:
1) I select the user Smith by means of the

▲▼

keys

➔

I press the

key

➔

I send the

call to the user identified with code 1.

2) From the keypad I enter the code 1

➔

I press the

key.

9B) INDIRECT CODE CALL MODE
In this operating mode the entry phone user is identified by the Indirect code, User name
(optional) and Code fields.
EXAMPLE: User name = Smith ; Code = 1 ; Indirect Code = 100
The call can be made in the following ways:
1) I select the user Smith by means of the

▲▼

keys

➔

I press the

key

➔

I send the

call to the user identified with code 1.

2) From the keypad I enter the Indirect Code 100

➔

I press the

key

➔

I send the call

to the user identified with code 1.

Entry of the list with the listed fields can only be carried out by means of the software
Art.1249/A.
The indirect code can have a maximum of 6 figures.
The User Name field can also be omitted (see Indirect Code Mode without name field
in the online Guide Art.1249/A).
To update a module where a list has already been stored, it is first necessary to
completely cancel the one present, following the procedure in the 8L paragraph.

To select the Standard call mode or indirect code, the following operations must be
carried out:

Select the SETTINGS /
CALL OPERATING
menu

Select the desired
mode by means
of the

▲▼

keys.

Press the

key to

confirm the selection

Access to the configuration
stage has been carried out
(see point 3),

CALL OPERATING

* STANDARD

INDIRECT CODE

CALL OPERATING

* STANDARD

INDIRECT CODE

CALL OPERATING

STANDARD

* INDIRECT CODE

NAME DIRECTORY

ACCESS CONTROL

SETTINGS

ON DISPLAY

DESCRIPTION

OPERATION