Comelit FT SB 08 - Manual (Page 26)

GROUP S.P.A.
FT SB 08 24
8E) ENTERING DIRECTLY FROM THE KEYPAD
(not available if the call mode is Indirect Code - see Point 9)
Access to the configuration
stage has been carried out
(see point 3),
Select the NAME
DIRECTORY/ENTERING
NAMES/MANUALLY
menu.
Proceed with user
name entry.
EXAMPLE:
JOHN SMITH
Press the key to
proceed with the user
code entry.
EXAMPLE: 1
The module is ready for
entering the names.
To cancel the character to
the left of the cursor, press
the
X key, for special
characters, key 9..:
ON DISPLAY DESCRIPTION OPERATION
NAME DIRECTORY
ACCESS CONTROL
SETTING
_
JOHN SMITH_
CODE: _ _ 1
8D) MULTIDOWNLOAD
It is possible to create an RS485 system with digital call modules Art.3340/3342 to
upload or download an user name list on any of the modules on this system, using a pc
upgraded with software 1249/A version 2.2 or later.
Each module must have different ID CODE (see point 10C),.
To install the RS485 system please refer to diagram CA/EN/108.
8F) CHANGING A NAME OR A USER CODE
(not available if the call mode is Indirect Code - see point 9)
Select the NAME
DIRECTORY/ CHANGE
NAMES menu.
Enter the user name to be
modified, with part of the
extension as well.
EXAMPLE: SMIT
Press the key to
proceed with searching
for the user name.
Access to the configuration
stage has been carried out
(see point 3),
ENTER PART
OF THE NAME
REQUIRED
SMIT_
SEARCH
IN PROGRESS…
The user name to be
modified is requested.
ON DISPLAY DESCRIPTION OPERATION
NAME DIRECTORY
ACCESS CONTROL
SETTINGS
Press the key to store
the user name and code.
It is possible to proceed to
enter other users.
STORING
IN PROGRESS…
Or:
NAME ALREADY
IN MEMORY
_
If the user name is already
in the directory.
ON DISPLAY DESCRIPTION OPERATION