Comelit FT SB 08 - Manual (Page 23)

FT SB 08
21 FT SB 08
E
N
G
L
I
S
H
TEST DESCRIPTION
5) SELF – DIAGNOSIS
On power up, the apparatus carries out a diagnostic test of the connections to check cor-
rect communication with porter module ART.1602/4660 and with the keypad module
which makes up ART. 3340.
If the wordi OK appears next to the item, then it has passed the test, otherwise, if the word
FAILED appears it has failed the test.
On completion of the Self-Diagnosis mode, press the
▼ key to put the module in the into
its normal mode of operation.
The table summarising the meaning of the single tests is given below:
INITIALIZING
SPEAK. SERIAL
MODE
Check the EEPROM which contains the
user name list. If the test fails, the module is faulty.
If the test fails, check correct serial connection
with porter module. Art.1602 / 4660 .
Check presence of the alphanumerical keypad
which makes up Art.3340. If the wording 3342 appears
next to the description, correct connection between the
alphanumerical keypad and the directory module must
be checked.
INITIAL CONDITION
6) USING THE NAME DIRECTORY
6A) SCROLLING AND CALLING THE USER SELECTED
Scroll the list by means
of the
▲▼ keys.
To exit, press the key
Press the key
to call the selected user.
It is possible to cancel
the call or the
conversation in progress
by pressing the X key.
During normal operation.
If some users have been
stored in the directory.
GIOVANNI ROSSI The names are entered
in alphabetical order.
The call has been made
correctly.
The call has not been
made correctly.
The system is engaged.
ON DISPLAY DESCRIPTION OPERATION
ENTER TENANT
CODE
Followed by:
SCROLL NAMES
SEARCH NAME
CALL EFFECTED
Or:
USER NOT
AVAILABLE
Or:
USER BUSY
CALL EFFECTED
Or:
COMMUNICATING