Comelit MT KIT 12 - Manual (Page 44)

GROUP S.P.A.
44 MT KIT 12
If the “Intercom” function was selected in the
previous step, the pushbutton must be assigned to
an internal unit.
INTERCOM X (see paragraph 14 B).
If the “Self-ignition” function was selected in the
previous step, the pushbutton must be assigned to
one or both of the internal units.
If the “Relay activation” function was selected in the
previous step, follow the procedure described for
Key pushbutton programming.
Once you have completed the programming
procedures, disable the installer menu.
Select the desired function using pushbuttons
, confirm your selection by pressing and then
press button .
Select the “Program Button 2” icon using pushbuttons
and confirm your selection by pressing .
From the installer menu (pushbutton 1), enter the
“Buttons programming” menu using and .
Pushbuttons 2, 3, 4 and 5 may be all programmed
using the same procedure. The programming
procedure for pushbutton 2 is illustrated below.
• PUSHBUTTONS 2 - 3 - 4 - 5
GENERAL INTERNAL: Make a call to all monitors in
the same residential unit.
GENERAL EXTERNAL: Make a call to all monitors
in the other residential unit.
Press pushbutton to exit and save the changes.
ENGLISH