Comelit MU 6501 - Manual (Page 12)

EN
12
1
2
12/06/13 05:55 12/06/13 05:55
VIDEO MEMO
INTERCOM CAMERAS
PROGRAMMER USER
Sat 12/06/13 01:21
12/06/13 05:55 12/06/13 05:55
VIDEO MEMO
INTERCOM CAMERAS
PROGRAMMER USER
Sat 12/06/13 01:21
SHORTCUT MENU
The "video recording" function, if enabled, allows automatic
recording of audio-video content from the external unit
when a call is received and the audio key (
) not
pressed.
The "door check" function (if programmed) can be used to
view the image form the external unit at each door on the
list, and to check for open doors.
√ LED 1 ( ) lights up and the icon turns blue to
indicate the presence of open doors.
• or recorded by the user during a video call using the
"video menu" (see page 11).
Audio-video content is stored in the VIDEO MEMO section.
• recorded automatically by the system when the "video
recording" function is enabled (page 12).
The function can be used to replay a video memory
message (see page 15) over the loudspeaker on the
external unit on receipt of a call.
} Press to enable / disable the function.
} Press the icon to access the OPEN DOORS
screen.
1. Press to lock the screen for 60 sec.
2. Press CONFIRM to confi rm the screen lock.
» the screen shows: "Keypad locked".
Press CANCEL to return to the main screen.
} From the main screen, press to access the MEMO
VIDEO section.
} Press the video to watch the recording.
√ The blue frame indicates the videos which have already
been viewed, and the yellow frame indicates new
recordings.
1. Press "C" to activate the deletion function.
» the key will be activated and will turn green.
2. Select the video you wish to delete.
3. Press CONFIRM to confi rm deletion, or press CANCEL
to return to the previous screen.
Viewing a recording
deleting a recording
Recordings are saved in .avi format on the SD card, in
the "video" folder. If there is no SD card, recordings will
be saved in the fl ash memory of the monitor (max. 8
recordings).
} Press to enable / disable the "video memory
message" function.
» the icon turns blue to confi rm the procedure was
completed successfully.
» LED 2 ( ) fl ashes and icon turns blue to
indicate the presence of video messages in the
VIDEO MEMO section.
Enable video recording
Video memo: view and delete
video memory recordings
Screen lock function
Door check function Enable video memory message
» the icon turns blue and LED 2 ( ) lights up
in blue to confi rm the procedure has been completed.