Comelit MU 6501 - Manual (Page 11)

EN
11
9000: Waiting for Reply
100
EXTERNAL UNIT CALL
Waiting for Reply
STANDARD FUNCTIONS
• To activate/deactivate the audio, press .
• To activate the external unit door lock function, press .
• To enable/disable the audio and acquire the video signal,
press .
• To activate the external unit door lock function, press .
• To display the image without activating audio
communication with the external unit, press
.
Answering a call
Lock-release
Self-ignition
Intercom call
I/O Actuator function
Privacy/Doctor function
On receipt of a call from the external unit:
3. During a call
} Press the display to open the video menu.
1. In the case of a main "master" monitor (max. 1 per
apartment) and up to 3 secondary "slave" monitors,
the image from the external unit automatically appears
on the monitor.
2. In the case of secondary "slave" monitors (from 4th
to 15th) the indication of a call from the external unit
appears.
Brightness: (press to adjust).
Contrast: (press to adjust).
Volume: (press to adjust).
Close video menu.
Record message. (If enabled from a secondary
monitor, the audio line with the external unit must be
active for the audio to be recorded)
The intercom function (disabled by default but can be
programmed by the installer) can be used to call an
internal unit.
} Press the key (1 / 2) programmed for the intercom
function to make the call.
The actuator function (disabled by default but can be
programmed by the installer) can be used to activate the
relay for a specifi c actuator installed in the system.
} Press the key (1/2) programmed for the "I/O Actuator"
function to carry out the programmed procedure.
• The Privacy function (default) disables the ringtone
for intercom calls, calls from the external unit and
switchboard calls.
• The Doctor function (programmable) enables automatic
activation of the lock-release in response to a call from
the external unit.
• The Privacy + Doctor function (programmable), as well
as disabling the door-entry phone ringtone in the same
way as the Privacy function, also enables automatic
activation of the lock-release in response to a call from
the external unit.
} Press ( ) to activate the Privacy/Doctor/Privacy+Doctor
function.
» The red LED indicates that the function is
active.
The Self-ignition function (disabled by default but can
be programmed by the installer) can be used to display
images from the camera associated with an external unit or
from a remote camera.
} Press the key ( / 1 / 2) programmed for the "Self-
ignition" function to display the images from the camera.
} To activate the external unit door lock function, press
.