Comelit MT 8171IGK - Manual (Page 13)

13 13
EN
1
2
3
4
1
2
3
4
5
6
3 4 5
CV 4 CV 3 DIP
140-145 cm 115-125 cm
CV 4 CV 3 DIP
1 2 2B 2A
14,4cm
8,1cm 1,4cm
1,4cm
10,3cm 10,1cm
Internal units
Art. 5801
Technical characteristics - Monochrome monitor Art. 5801
1 Monitor handset (lift the handset to start communication).
2 3-position ringtone selector:
æ
,EFTæPOSITIONæ#ALLæTONEæATæMAXIMUMæVOLUME
Central position: Call tone at medium volume
Right position: Minimum ringtone volume.
3 Brightness control knob (turn anticlockwise to increase brightness).
4
æ væ"LACKæANDæWHITEæSCREEN
Description of buttons:
A Key button.
P1 Button available as standard for generic actuator, can be used for
various services (C.NO. contact 1 A max.) depending on system
requirements; removing CV3 and CV4 as specified in variant GK/PI on
page 69.
P2 Button available as standard for Automatic switch-on/Video request.
Art. 5814K
1 JP2 Jumper for programming user addresses.
2 Bracket-Monitor connector.
3 JP1 Jumper for programming the bracket as Main (M) or Secondary
(S) (see page 16).
4 CV3 CV4 Jumpers for freeing Button 1 (C. NO. contact 24 V- 100 mA
max.).
5 Terminal block for system connection:
0V 20V Terminals for connection to Art. 1207 or 1212/B.
L L Bus line connection terminals.
CFP CFP Floor door call input.
P1 C1 Contacts for Button 1 used for various purposes.
To have a C.NO. contact (24 V-100 mA max.), remove jumpers CV3
and CV4.
+S -S Terminals for call repetition device.
6 CV5 Jumper for video closure.
Installing Art. 5801 as a flush- or wall-mounted device