chiliGREEN ArcSoft TotalMedia 3.5 User Manual

Page 17

ArcSoft TotalMedia™ Manual

SETTINGS

View and edit TV settings.

Reset TV Signal

This section lets you view and edit the settings for TV signal.

The settings is devided into four steps:

1. Select your region.
2. Select video device.
3. Click "Start" to scan for available channels.

Note: The last channel list will be saved, so there is no need to rescan channels.

4. Set up two tuners. After setting up one tuner, if there is another tuner in your PC, you can

repeat the steps for the second tuner.

Choose the options you want from the various pull-down lists. The program also provides
"Previous" and "Next" buttons to switch between setup pages.

When you're ready, click "Finish".