chiliGREEN GA-A75M-S2V - Manual (Page 9)

- 9 - Hardware Installation
Internal
Connectors
1 x 24-pin ATX main power connector Š
1 x 4-pin ATX 12V power connector Š
6 x SATA 6Gb/s connectors Š
1 x APU fan header Š
1 x system fan header Š
1 x front panel header Š
1 x front panel audio header Š
1 x S/PDIF Out header Š
1 x USB 2.0/1.1 header Š
1 x USB 3.0/2.0 header Š
1 x serial port header Š
1 x Trusted Platform Module (TPM) header Š
1 x clearing CMOS jumper Š
Back Panel
Connectors
1 x PS/2 keyboard/mouse port Š
1 x D-Sub port Š
1 x DVI-D port Š
4 x USB 2.0/1.1 ports Š
2 x USB 3.0/2.0 ports Š
1 x RJ-45 port Š
3 x audio jacks (Line In/Line Out/Microphone) Š
I/O Controller iTE IT8720 chip Š
Hardware
Monitor System voltage detection Š
APU/System temperature detection Š
APU/System fan speed detection Š
APU overheating warning Š
APU/System fan fail warning Š
APU/System fan speed control Š
* Whether the APU/system fan speed control function is supported will depend on the
APU/system cooler you install.
BIOS 2 x 32 Mbit flash Š
Use of licensed AWARD BIOS Š
Support for DualBIOS Š ™
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Š
Unique Features Support for @BIOS Š
Support for Q-Flash Š
Support for Xpress BIOS Rescue Š
Support for Download Center Š
Support for Xpress Install Š
Support for Xpress Recovery2 Š
Support for EasyTune Š
* Available functions in EasyTune may differ by motherboard model.
Support for Smart Recovery Š
Support for Auto Green Š