9 load fail-safe defaults, 10 load optimized defaults, Cpu smart fan mode – chiliGREEN GA-A75M-S2V User Manual

Page 36: System smart fan control

BIOS Setup

- 36 -

CPU Smart FAN Mode

Specifies how to control CPU fan speed. This item is configurable only if CPU Smart FAN Control is set

to Enabled.

Auto

Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal

CPU fan control mode. (Default)

Voltage Sets Voltage mode for a 3-pin CPU fan.

PWM

Sets PWM mode for a 4-pin CPU fan.

System Smart FAN Control

Enables or disables the system fan speed control function. Enabled allows the system fan to run at dif-

ferent speed according to the system temperature. If disabled, system fan runs at full speed. (Default:

Enabled)

Press on this item and then press the key to load the safest BIOS default settings.

In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable

BIOS settings for the motherboard.

2-9 Load Fail-Safe Defaults

Load Fail-Safe Defaults



MB Intelligent Tweaker(M.I.T.)



Standard CMOS Features



Advanced BIOS Features



Integrated Peripherals



Power Management Setup



PC Health Status

ESC: Quit



: Select Item

F11: Save CMOS to BIOS

F8: Q-Flash

F10: Save & Exit Setup

F12: Load CMOS from BIOS

Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving

Load Fail-Safe Defaults (Y/N)? N

Press on this item and then press the key to load the optimal BIOS default settings.

The BIOS defaults settings help the system to operate in optimum state. Always load the Optimized defaults

after updating the BIOS or after clearing the CMOS values.

2-10 Load Optimized Defaults

Load Optimized Defaults

