beautypg.com

4 standard cmos features, Date (mm:dd:yy), Time (hh:mm:ss) – chiliGREEN GA-A75M-S2V User Manual

Page 29: Ide channel 0, 1 master/slave, Ide channel 2, 3 master, Halt on

background image

- 29 -

BIOS Setup

2-4 Standard CMOS Features

Date (mm:dd:yy)

Sets the system date.

Time (hh:mm:ss)

Sets the system time.

IDE Channel 0, 1 Master/Slave

IDE HDD Auto-Detection

Press to autodetect the parameters of the SATA device on this channel.

IDE Channel 0, 1 Master/Slave

Configure your SATA devices by using one of the two methods below:

• Auto

Lets the BIOS automatically detect SATA devices during the POST. (Default)

• None

If no SATA devices are used, set this item to None so the system will skip

the detection of the device during the POST for faster system startup.

Access Mode

Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.

IDE Channel 2, 3 Master

IDE Auto-Detection

Press to autodetect the parameters of the SATA device on this channel.

Extended IDE Drive

Configure your SATA devices by using one of the two methods below:

• Auto

Lets the BIOS automatically detect SATA devices during the POST. (Default)

• None

If no SATA devices are used, set this item to None so the system will skip

the detection of the device during the POST for faster system startup.

Access Mode

Sets the hard drive access mode. Options are: Auto (default), Large.

Capacity

Approximate capacity of the currently installed hard drive.

Halt On

Allows you to determine whether the system will stop for an error during the POST.

Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)

Memory

These fields are read-only and are determined by the BIOS POST.

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software

Standard CMOS Features

Date (mm:dd:yy)

Thu,

Jun 9 2011

Time (hh:mm:ss)

22:31:24

IDE Channel 0 Master

[None]

IDE Channel 0 Slave

[None]

IDE Channel 1 Master

[None]

IDE Channel 1 Slave

[None]

IDE Channel 2 Master

[None]

IDE Channel 3 Master

[None]

Halt On

[All, But Keyboard]

Base Memory

640K

Extended Memory

1022M



: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Defaults

F7: Optimized Defaults

Item Help

Menu Level 