3 mb intelligent tweaker(m.i.t.), Igx configuration, Uma frame buffer size – chiliGREEN GA-A75M-S2V User Manual
Page 25: Vga core clock control, Vga core clock(mhz)
- 25 -
BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
• Whether the system will work stably with the overclock/overvoltage settings you made is depen-
dent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in
damage to CPU, chipset, or memory and reduce the useful life of these components. This page is
for advanced users only and we recommend you not to alter the default settings to prevent system
instability or other unexpected results. (Inadequately altering the settings may result in system's
failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)
• When the System Voltage Optimized item blinks in red, it is recommended that you set the
System Voltage Control item to Auto to optimize the system voltage settings.
(Note) This item is present only when you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
MB Intelligent Tweaker(M.I.T.)
IGX Configuration
[Press Enter]
CPU Clock Ratio
[Auto]
2300Mhz
CPU NorthBridge Freq.
[Auto]
Core Performance Boost
(Note)
[Enabled]
CPB Ratio
(Note)
[Auto]
2400Mhz
CPU Host Clock Control
[Auto]
x CPU Frequency (MHz)
100
PCIe Spread Spectrum
[Disabled]
Set Memory Clock
[Auto]
x Memory Clock
x6.66
1333Mhz
DRAM Configuration
[Press Enter]
******** System Voltage Optimized ********
System Voltage Control
[Auto]
x DDR3 Voltage Control
Auto
x FCH Voltage Control
Auto
x CPU VDDP Voltage Control
Auto
x CPU VCORE NB Control
Auto
x CPU Voltage Control
Auto
Normal CPU Vcore
1.4000V
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
IGX Configuration
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
IGX Configuration
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Item Help
Menu Level
UMA Frame Buffer Size
[Auto]
VGA Core Clock control
[Auto]
x VGA Core Clock(MHz)
600
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB,
512MB, 1024 MB.
VGA Core Clock control
Allows you to determine whether to manually set the VGA Core clock. (Default: Auto)
VGA Core Clock(MHz)
Allows you to manually set the VGA Core clock. The adjustable range is from 300 MHz to 2000 MHz.
This item is configurable only if the VGA Core Clock control option is set to Manual.