chiliGREEN D915GAGL User Manual
Page 62
Intel Desktop Board D915GAV/D915GAG Technical Product Specification
62
Table 18. PCI Interrupt Routing Map
ICH6 PIRQ Signal Name
PCI Interrupt Source
PIRQA
PIRQB
PIRQC
PIRQD
PIRQE
PIRQF PIRQG PIRQH
ICH6
LAN
INTA
PCI bus connector 1
INTD
INTA
INTB
INTC
PCI bus connector 2
INTC
INTB
INTA
INTD
PCI bus connector 3
(Note)
INTD INTC INTA INTB
PCI bus connector 4
(Note)
INTB
INTA
INTC
INTD
Note: Not present on the D915GAG board.
NOTE
In PIC mode, the ICH6 can connect each PIRQ line internally to one of the IRQ signals (3, 4, 5, 6,
7, 9, 10, 11, 12, 14, and 15). Typically, a device that does not share a PIRQ line will have a unique
interrupt. However, in certain interrupt-constrained situations, it is possible for two or more of the
PIRQ lines to be connected to the same IRQ signal. Refer to Table 17 for the allocation of PIRQ
lines to IRQ signals in APIC mode.
PCI interrupt assignments to the USB ports, Serial ATA ports, and PCI Express ports are dynamic.