chiliGREEN E7130 - Manual (Page 26)

1 - 4 System Startup
Quick Start Guide
1
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
4. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter.
5. Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 135 degrees); use the other
hand (as illustrated in
Figure 1 - 1 below) to support the base of the computer (Note: Never lift the computer by
the lid/LCD).
Figure 1 - 1 - Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In

Shutdown
Note that you should always
shut your computer down by
choosing the Shut Down
command from the bottom
right of the Start menu in
Windows. This will help pre-
vent hard disk or system
problems.