chiliGREEN W270BUQ User Manual
Page 183
Modules & Options
3.75G/HSPA Module 7 - 61
7
SIM
Most USIM cards are protected by a Personal Identity Number (PIN). You may turn
on or off the Request PIN at startup (click Apply to save any changes). You can
also Change PIN (you will need to enter the new PIN in the two fields provided and
click Apply to save any changes).
Radio
Radio needs to be turned on before you can make any connection (note this is not
the same as powering the module off/on using the Fn +
key combination), but
you may turn it off when required. Automatic mode is the recommended setting for
most 3G networks as it will use 3G where available. All Frequency bands are se-
lected as default (click Apply to save any changes).
PIN Notes
You will have to enter
your current PIN to
change the PIN settings.
Request PIN at startup
will apply only after you
have shut the computer
down and restarted it
(not just restarted).
Radio & Power
Saving States
You can choose to have
the radio turned on or off
during
Hibernate or
Sleep power saving
states.
Figure 7 - 51
Advanced Settings
SIM & Radio