Bay cover in, Cover, Cover in – chiliGREEN W270BUQ User Manual

Page 122: Cover pins

Text mode
Original mode

Upgrading The Computer

6 - 14 Upgrading the System Memory (RAM)

11. Replace the bay cover by (for Model C computers make sure you insert the

cover at an angle of LESS THAN 30° ) aligning the cover pins (see sidebar -
make sure you reconnect the fan cable before screwing down the bay cover).

12. Restart the computer to allow the BIOS to register the new memory configuration

as it starts up.



Cover Pins

Note that this computer
model has four cover
pins. These pins need to
be aligned with slots in
the case to insure a
proper cover fit, before
screwing down the bay
cover.

Figure 6 - 10

Component Bay

Cover Pins

Models B & D

Models E & F

Model A

Model B

Model C