Carter-Hoffmann PHW1822 - Manual (Page 4)

4
PHW1822 SPECIFICATIONS
*Wlill accommodate trays up to 4” deep. Capacity shown at 5” spacing. 11 pairs of slides in each compartment. Will accommodate Gastronorm 2/1 pans (1 per slide),
Features & Benefits
• Heaviest-duty for correctional environment, with welded-on transport latches with padlock provision, tamper-
resistant fasteners, reinforced full-perimeter bumper
• Completely covered cabinet bottom to eliminate concealment of contraband; no open crevices or holes
• Flush mounted door design with welded-on heavy-duty strap hinges; flush-mounted sliding door latches
• Stainless steel tubular push handles
• Heated (right side) and heated/humidified (left side) sections; water reservoir in humidified side provides
passive humidity
• Insulated divider between heated and heated/humidified sections
• Removable tray rack assemblies with slides welded to channels; tamper resistant rack hold down device
• All welded turned-in seam stainless steel construction with welded-in-place reinforced mullion
• 8” polyurethane casters mounted in wheel-ahead pattern for easy movement over uneven surfaces; two rigid
and 2 swivel with brakes
• Recessed heater controls with protective control covers
; 208 volts, 3063 watts, 60 Hz, single phase, 15 Amps,
NEMA L6-20P plug
• Preheat to 160°F in 40 minutes; temperature range 80°F to 200°F
Model
Number
18”x 26” Tray
Capacity*
Heated Htd/
Humidified
Slide
Pairs
Provided
Inside
Working
Height
in (mm)
Overall Dimensions
Height Depth Width
in (mm)
Caster
Diameter
in (mm)
Class 100
Shipping
Weight
lbs (kg)
PHW1822 11 11 22 55
(1397)
72-1/8 35-3/4 55-3/4
(1832) (908) (1416) 8
(203)
598
(271)
Heated & Humidified Transport Cart for 18”x26” Trays