Caron CRSY102 User Manual
Page 21
CRSY102 Operations Manual
Rev G 1/31/2013
Page 21
Replacing UV Light (optional accessory)
1. Turn off recirculator and unplug power cord.
2. If necessary, pull recirculator away from wall.
3. Remove left access panel (as viewed from front). To remove panel, pull down
on the latch tabs and rotate panel outward.
4. Unclip green wire with ground clip from UV light housing.
5. Pull UV light housing cap from UV light housing. Connected UV lamp will
come out with it.
Before removing access panel(s), disconnect
electrical power.
Avoid exposure to direct or reflected germicidal
ultraviolet rays. Germicidal ultraviolet rays are
harmful to the eyes and skin.
UV Light Housing
Green Wire with
Ground Clip
UV Light
Housing Cap
UV Lamp