Caron CRSY102 User Manual
Page 17
CRSY102 Operations Manual
Rev G 1/31/2013
Page 17
SECTION 4
– MAINTENANCE
Refilling Reservoir
The reservoir water level can be monitored through the front viewing window.
Additionally, the low water indicator light will illuminate when the reservoir needs
refilled. Water can be added to the reservoir while the recirculator is on. Do not use
ultra-pure DI above 1 M
Ω-cm.
Replacing Filters
1. Turn off recirculator and unplug power cord.
2. If necessary, pull recirculator away from wall.
3. Remove right and left access panels. To remove panels, pull down on the
latch tabs and rotate panel outward.
When adding water to the reservoir, do not spill
onto recirculator.
If reservoir water level is too low, it will not supply
water to the chamber(s) and proper chamber
humidity level may not be maintained.
Before removing access panel(s), disconnect
electrical power.
Access Panel
Latch Tabs