Blue Sea Systems 1801 Vessel Systems Monitor VSM 422 - Manual (Page 42)

80
Specifications subject to change. See www.bluesea.com for current information.
Run Time/Hour Alarm Setup
1. Page through main screens by pressing NEXT until the
BILGE STATUS page is visible.
2. Press SETUP
3. Scroll to and press SELECT on Pump Alarms.
4. Scroll to and press SELECT on Run Time/Hr Alarm.
5. Scroll to and press SELECT on Set High Limit.
6. Use the Scroll Bar method to set limit.
7. Press EXIT three times to return to main system screens.
79
Specifications subject to change. See www.bluesea.com for current information.