Online manual not for resale purposes – BLITZ Scion xB-xA Compressor System User Manual

Page 16

29. Using #27 Silicon hose, and #28 hose
clamp (2) attach the #4 inlet pipe. Attached
temporarily.

30. Using ⑩ Allen bolt (2), attach #10
bracket to #4 inlet pipe. Secure down
bracket and inlet pipe.

27. Silicon hose

28. Hose
clamp

4. Inlet
Pipe

10. Inlet pipe

bracket

31. Installing the blow-by hose and vacuum
line.

**** Because the blow-by hose and the
vaccuum hose will be long please cut to
appropriate length.

32. Using #29 hose clamp, secure down the
blow-by hose. Use factory clamp for vacuum
line.

Blow-by hose

Vaccuum
hose

29. Clamp

Cuts to suitable
length

Online Manual Not For Resale Purposes