Beka Toy chest - Manual (Page 2)

Step 5)
Using the remaining truss head screws attach the
back assembly to the same side piece. Attach re-
maining chest side, holding the bottom and back
assemblies in place.
NOTE: Back assembly should rest on bottom
supports.
Fig. 5
Step 6)
Carefully push casters’ metal stem into holes lo-
cated on the underside of chest so they are fully
seated. Fig. 6
Step 4)
Using truss head screws, attach one chest side to
the bottom assembly., as shown in fig. 4.
Note: Slots on chest sides should face inward.
Fig. 4
Slotted side
Fig. 7 Step 7)
Slide front piece into the slots provided on the
chest sides until it rests evenly on the bottom.