Beka Store front theater - Manual

Manufactured by Beka, Inc. • 542 Selby Avenue • St. Paul, Minnesota 55102 • USA
1-888-999-2352 • www.bekainc.com • 651-222-3965 fax
Contents:
Center Panel 2 Wooden feet
4 flat head screws 1 wooden curtain rod
1 pair of curtains
You will need a Phillips screwdriver.
Read instructions completely before beginning.
Step 1:
Attach feet to panel as illustrated to the right using a
Phillips screwdriver. Note: screw heads will fit into
recessed end of predrilled holes.
Step 2:
Slide curtain rod to one side exposing end of dowel.
Attach curtain to rod by threading curtain hem onto rod.
Reposition rod in pane
l.
Store Front Art Surface
Your Store Front Theater comes with either a chalk or
wipe-off whiteboard surface. Be sure to follow the rec-
ommendations listed below that apply to your specific
theater.
Chalk Surface
Our green chalk surface is ready to use and is compatible
with any standard chalkboard chalk. If you are unsure of
your chalk, test it on a corner of the board first to insure
easy erasure. Use a soft cloth or chalk eraser to clean
board
.
Wipe-off Marker Board Surface
Special wipe-off markers are erased by rubbing with a
soft cloth. Whatever marker brand you choose, first test
it on a corner of the board to insure easy erasure. Clean
your whiteboard regularly. Marker left on the surface
for several days can be difficult to remove and may leave
a stain
.
Store Front Theater
Assembly Instructions
WARNING—ADULT ASSEMBLY REQUIRED!
Enclosed hardware includes sharp points and small parts, so
may present hazards to children prior to assembly.
After assembly, an adult should check hardware
periodically to insure it is tight
Dispose of plastic bags and any extra hardware to avoid
potential choking hazards.
We have designed our
Store Front Theater
for both stability
and mobility.
Light, yet sturdy,
it goes where you
and your audience go.