Beka 3-sided cart - Manual

Beka, Inc. • 542 Selby Avenue • St. Paul, Minnesota 55102 • USA
1-888-999-2352 • www.bekainc.com • 651-222-3965 fax
3-SIDED CART
Parts:
Baltic Birch Hardware:
1 – 1/2” X 11-3/4” X 22-3/4” Back 4 – Casters
1 – 1/2” X 11-3/4” X 22-3/4” Bottom 1 – 3/4” X 21-1/4” Dowel
2 – 1/2” X 13-5/8” X 13-5/8” Cart Sides 8 – 10 X 1-1/4” Phillips, Flat Head Screws
Hard Maple 8 – 10 X 1-1/4” Phillips, Truss Head Screws
2 – 1- 3/8” X 1-3/8” X 13-5/8” Bottom Supports
2 – 1-3/8” X 1-3/8” X 15” Back Supports
Assembly Instructions:
Fig. 1
Step 2)
Using flat head screws, attach back (recessed
holes out) to one back support. Make sure the
large “dowel hole” faces inward, as shown.
Fig. 2
Model # 6200
Step 1)
Using flat head screws, attach the bottom
(recessed holes up) to the bottom supports. Make
sure the large “caster holes” face down and the
predrilled hole closest to the end of each support
is near the edge. The bottom assembly should
look like figure 1.