Barranca Diamond HP30 Slab Saw - Manual (Page 9)

9
HP30 SPECIFICATIONS
Motor Baldor
Horsepower 2.0 Hp
Voltage 220V / 60 Hz
Amperage 8
Motor RPM 1725
Blade RPM 380
Arbor Size 1”
Blade Capacity 24" - 30”
Depth of Cut 12"* (w/ 30" Blade)
Vise Opening 17”
Oil Capacity 20 Gallons
Blade Included 30" 303S
L x W x H 67” x 37” x 49”
L x W x H (mm) 1,701 x 940 x 1,245
Dry Weight 675 lbs. (306 kg)
Part Number 168084
MOTOR
Single phase, continuous duty commercial grade motor with automatic thermal overload protection. Manual
reset button on HP30 Baldor motors. Export motor 230 volts 50Hz can be ordered.
FEED MECHANISM
Stainless steel screw rod with silicon bronze threaded clutch block engagement system. Silicon bronze spur to
hardened steel worm gear to belt pulley drive.
LUBRICATING SYSTEM
Submersible pump provides lubrication, flushing & cooling using petroleum or mineral oil based lubricant. Wa-
ter should NEVER be used as a lubricant in any of the Highland Precision series saws as it will adversely affect
cutting performance, blade life, power feed, iron/steel components, and create bearing problems with the saw.
LUBRICANT REFERENCE
HP30: 20 gallons
Refer to page 11.
CARRIAGE & VISE MATERIAL
Cast Iron.
CARRIAGE RAILS
Stainless steel rod.
SHAFT BEARINGS
Sealed flange mount ball bearings with zerk fittings for grease lubrication.
* Shape of specimen maximum depth of cut will vary
depending on size