Barranca Diamond SUPER CABMAKER-GP8 - Manual (Page 11)

11
CONTENTS
In the shipping crate, you will find one Barranca Diamond GP-8 Super Cabmaker mounted to a plastic base-
board and one Ground Fault Circuit Interrupter (GFCI).
The accessories for the GP-8 Super Cabmaker will be included depending on which option you choose
(see page 10).
UNPACKING
Your GP-8 Super Cabmaker has been shipped from the factory thoroughly inspected and tested. Remove the
crating material (wood and plastic) from the baseboard and around the machine carefully using a Phillips and
standard screwdriver, wire cutter and box cutter knife. Any accessories should be removed from the unit and
put aside.
TRANSPORT
For safe transport, disconnect the submersible pump and power cord and remove lubricant and water from the
wheel reservoirs of the GP-8 Super Cabmaker.
SUPER CABMAKER GP8 SETUP