Autoquip VERTICAL RAM LIFTS - DUAL RAM - Manual (Page 3)

3
IDENTIFICATION
When ordering parts or requesting information or service on this lift, PLEASE REFER
TO THE MODEL AND SERIAL NUMBER. This information is on a nameplate attached
to the lift platform. Replacement parts are available from a local Autoquip distributor.
INSPECTION
Immediately upon receipt of the lift, a visual inspection should be made to determine
that the lift has not been damaged in transit. Any damage found must be noted on the
delivery receipt. In addition to this preliminary inspection, the lift should be carefully
inspected for concealed damage. Any concealed damage found that was not noted on
the delivery receipt should be reported in writing to the delivering carrier within 48 hours.
The following is a checklist that will aid in the inspection of the lift.
1. Examine entire unit for any signs of mishandling. Pay special attention to the power
unit and controls.
2. Thoroughly examine all connections, making sure they have not vibrated loose
during transit.
3. Check to make sure tat there are no missing parts. If any parts appear to be
missing, contact the Autoquip Customer Assurance Department immediately.
IDENTIFICATION & INSPECTION