Autoquip COIL TRANSFER CARS - Manual (Page 36)

36
PROBLEM POSSIBLE CAUSE AND SOLUTION
Lift won’t go forward or
reverse • The traverse path may be blocked with debris or
other obstacle. Look under the base and
remove any obstacle that may impede travel.
• The axle may be “high centered” on some
obstacle, preventing the wheels from gaining
enough traction. Inspect under the axles and
remove any obstruction.
• The non-rotation devise may have broken or
vibrated loose. Reattach or replace bracket.
• The load may exceed the nameplate capacity
and exceed the horsepower ratings for the drive
train. Ensure the load is within the rated limits.
• There may not be enough amps available.
Check the supply amperage to ensure it
provides the minimum amperage needed per the
vendor’s specifications.
• There may be a loose electrical connection.
Make sure all electrical connections are intact
and check for shorts.
TROUBLESHOOTING ANALYSIS