Autoquip COIL TRANSFER CARS - Manual (Page 18)

18
To traverse the lift the operator simply depresses either the “FORWARD” or
“REVERSE” button on the pushbutton control energizing the reversing motor starter in
the control panel. The motor starter activates the motor in either direction, which then
turns the gearbox reducer. The splined output shaft runs through the gearbox and
drives the drive wheels mounted on each side of the lift. When the desired travel is
achieved, release the pressure from either the “FORWARD” or “REVERSE” button.
Note: Even though the motor has a brake, there will be slight forward motion
after the button is released while the lift “coasts” to a complete stop.
OPERATING INSTRUCTIONS